Sentence examples for width of the elements from inspiring English sources

By changing the time for selective etching of the photoresist, it is possible to change the width of the elements of the lithographic masks.

By changing the time of selective etching of photoresist, it is possible to change the width of the elements of lithographic masks and, accordingly, the width of opened intervals between the elements of the mask through which there is a further etching of the metal layer.

In such a way, the vertical load was applied with an eccentricity equal to half of the width of the element with respect to its centre of the mass.

( c_{c0} ) can be calculated as (Fig. 1), c_{co} = int nolimits_{0}^{2r} f_{co } (x b(x dx (2 where ( f_{co } (x) ) and ( b(x) ) are respectively the concrete stress and width of the element at distance x from the column heel, see Fig. 1.

The spine is about as long as the width of the element, and curves slightly inward.

The two more proximal spines are about half as long as the width of the element; the third one is about twice as long but only slightly wider at its base.

Here, we study log-periodic antennas that exhibit broadband directivity as a result of the self-similar relation between the lengths, separations and widths of the elements.

The results demonstrate that when the helix angle of conveying elements turns from forward (45°) to reverse (−37.5°), the disc width of the kneading elements decreases from 7.5 mm to 5 mm, and when the disc stagger angle turns from forward (45°) and forward (90°) to reverse (−45°), the screw fill degree and specific mechanical energy increase.

The detailing requirements for special moment frames designed for seismic effects such as the width of the RC elements in relation to the rebar sizes, or the width of the RC elements in comparison to the stirrup spacing, were not fulfilled by the case study structure.

In the case of a two-dimensional model, the electrode will be divided in two directions, and the widths of the element will be ΔX and ΔY.

Width of the solid elements could be chosen arbitrarily.