The W top, bottom-fin width (W bottom), and the total fin width (W total), which is defined as 2 × W sidewall + W top, are also listed in Table 1.
Trawls energy efficiency is greatly affected by the drag, as well as by the swept area regarding pelagic trawls and by the swept width for bottom ones.
This study aimed at investigating the effect of two smartphone form factors (width and bottom bezel) on touch behaviors with one-handed interaction.
Power consumption of flow and output power of a PEMFC are considered into the objective function, and the width of bottom and top edges of the channel, in both the anode and cathode sides, are selected as variables.
The main parameters defining the fault geometry are length (km), width (km), bottom depth (km), strike angle (deg), that measures the angle between the fault and the N S direction, and the dip angle (deg), that measures the inclination of the fault plane with respect to the surface.
Also for this classification, the progression in terms of phase along the cycle is substantially faithful to the increase in HL (in the top plot of Fig. 2(b) the most significant outlier is still the category "translation" already mentioned, see also Fig. 3), and the progression in phase is paralleled by an increase in pulse width (see bottom plot of Fig. 2(b)).
It is observed from the photograph of the fabricated device that the lines of electrodes are regular and the widths of bottom electrodes overlapped by top electrodes are about 5 μm.
Exploratory activity was measured using a Y-maze apparatus (arm length: 40 cm, arm bottom width: 3 cm, arm upper width: 10 cm, height of wall: 12 cm).
Results show the ratios of the water surface width to depth, bottom width to depth and water surface width to bottom are all constant for the best hydraulic section.
