Sentence examples for width as compared to from inspiring English sources

Within the media, based on the data as presented in Table 5 a subdivision may be recognised in phase 3. Here, values for medial width as compared to those of the reference set for vessels with comparable diameters, fall below 100% at a statistically significant level.

Our tolerance studies show that η is relatively more critical to the slot width as compared to its height.

The minimum reflection loss (RL) was observed for PVB-NiO-FAC composite in a large band width as compared to PVB-CoOx-FAC and PVB-FAC composites.

The UV ZnO NBE luminescence at low temperature is still without the company of defect-related visible emission, but with a narrowed width as compared to that recorded at room temperature, as shown in Fig. 6b which illustrates the PL spectra recorded at 20 K.

The influence of varying the buffer concentration, injection volume and column temperature on the peak widths and resolution of the β-lactoglobulins was investigated, e.g. a 100 μl sample of dilute β-lactoglobulins was injected directly on the column with practically no increase in peak width as compared to what obtained with conventional injection volumes.

Treatment with LIRA or mannitol alone had no effect on scratch width, as compared to the control group.

Their study revealed broader Nas widths as compared to low and high latitudes.

Concrete beams reinforced with fiber reinforced polymer (FRP) bars exhibit large deflections and crack widths as compared to concrete beams reinforced with steel due to the low modulus of elasticity of FRP.

The GFRP hybrid bars can provide structural efficiency to the RCs having low crack width and deflection as compared to normal GFRP bars and exhibit better serviceability in flexure.

Using flow injection analysis, the PolyJet 3D printed radial flow-cell provided an increase in both the signal magnitude and duration, with an average increase in the peak height of 63% and 58%, peak area of 89% and 90%, and peak base width of 41%and42%2%, as compared to a coiled-tubing spiral flow-cell and the PolyJet 3D printed spiral flow-cell, respectively.

On the basis of the experiment program including the influence of prestressing force, side concrete cover, stirrup spacing, bond characteristics of stirrup and the amount of longitudinal reinforcement on shear crack width, the research (Silva et al. 2008) revealed that the prestressing force significantly reduced shear crack width in PRC beams as compared to RC beams.