Your English writing platform
Discover LudwigExact(1)
On the coating with a low Al content (≈40 at.%) and with low amount of Pt (4 at.%), no α-Al2O3 phase was observed while on the coating with a similar Al content but with much higher Pt level (16 at.%), grains of α-Al2O3 phase were detected.
Similar(59)
Crystallization of single-phase CTO coatings on titanium is observed starting at 500 °C, while on Si, the coating remains amorphous at 550 °C, and an intermediate CaCO3 phase is observed at up to 650 °C.
The ABG-I prosthesis has an HA layer on the proximal third while on the Unique stem, the HA coating covers approximately two-thirds of the device.
The increase of dipping cycles can raise the thickness of the coating, while attaching more ZrO2 crystals on the coating surface.
The current density in electropolishing process significantly influenced the thickness, elastic modulus and hardness of Ni coating, while it showed little influence on the coating surface roughness.
Uniform and pore-free electroless coatings with compact grain boundaries were formed on the 2 and 5 min Sr-P treated samples while the coating on the 15 min treated sample showed granular structure with obvious inter-granular space.
The purpose of these tests was to evaluate the effects of the flow rate and the viscosity on the hydrodynamic roughness while keeping the coating thickness constant.
The electroless coating obtained by 2 min Sr-P treatment showed the best corrosion protection in 3.5 wt% NaCl due to its compact structure while the coating applied on 15 min treated sample was failed when exposed to the corrosive solution.
While SFE of the coating produced from cationomer no.
While the coating surface had no obvious residual stains after the washing, the stains could be seen on the Cu and Al surfaces).
Nothing is more characteristic of a Philharmonic concert than what happens when it's over: half the downstairs listeners promptly rise to squeeze toward the aisle and depart, applauding (if at all) while putting on their coats.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com