As a receiver, an omnidirectional 7 dBi antenna has been used, which provides a 360° horizontal beam width and vertical beam width of 23° (model OAN-1070 from LevelOne).
Through an easy-to-use interface, the SeAMotE web-server offers key features such as fast discrimination based on pattern occurrence, choice of multiple reference backgrounds (shuffle, random or custom) and identification of significant motifs in the whole span of tested pattern widths, which provides a range of practical solutions for analysis of experimental data.
The number for each bin is then smoothed with a fixed width (default value 500 bp), which provides a good approximation of the real read distribution.
The screening distance scales with the gap width of electrodes and the length of SWCNTs, which provides a way to estimate the assembled density of SWCNTs.
Furthermore, a linear relation between the slot width and the operating wavelength is found after optimization, which provides a convenient method to design low-loss slot waveguide.
By limiting the sample-to-sensor distance to almost the beam-cube width (i.e., zSS ~11 mm - see Fig. 1(a)), using a CMOS sensor with an active area of ~5.70 x 4.28 mm, we can achieve a detection NA of ~0.2, which provides a close match to the illumination NA provided by the PH.
Nodule volume was calculated automatically by the ultrasound machine, using the formula: length × width × thickness × π/6, which provides an approximation to the volume of a spheroid, and is reported to be 80 85% accurate [ 7].
Figure S3 presents an image of DNA showing the helical repeat of 3.4 nm, which provides an estimate of the resolution in the single touch AFM experiments and shows how the tip width of the AFM probe influences the observed width of the sample, but not the height.
HSIAO [9] extrapolated that the effect formula of error on the beam's width, which provided a very beneficial and applicable supplement to extant theories on antenna gain loss.
Detonation cell widths, which provide a measure of detonability of a mixture, were measured for hydrocarbon air and hydrogen air diluent mixtures.
Consequently, critical anvil width ratio (w/h), and critical blank width ratio (b/h), are obtained, which provide a sound basis for designing reasonable stretching technology.
