Sentence examples for wet solids from inspiring English sources

This drying module was applied as an exergy recuperative process for the drying of wet solids.

Although the drying of wet solids is an example of humidification, the reduction of the moisture content of the solids is the main objective, and the humidification of the air stream is a secondary effect.

The determination of moisture distribution in a sample of wet solids is important as it can provide information on how well a liquid reagent has been sprayed in a fluidized bed reactor.

In this paper on drying of wet solids in a fluidised bed a model is presented which describes the mass transfer from the solids to a rising bubble for the case that there is no diffusion limitation inside the solids.

In the model, a cross-flow dryer is treated as a series of gas-solid contact stages, each purged by a stream of drying gas while wet solids are passing through.

This study evaluates various methods for the determination of the moisture distribution in a sample of wet solids, such as funnel flow, angle of repose, compressibility index, avalanche tests and electrical conductance.

In the first step, those crude oil components were extracted, which preferentially wet solid surfaces.

They were building squalor — making new things look old, clean things look filthy, dry things look wet, solid things look rotten.

The optimal medium leading to a production yield near to 28 mg of crude lipopeptide preparation per g of wet solid material was composed of a mixture of 4.34 g of tuna fish flour and 5.66 g of potato waste flour with a moisture content of 76%.

The wet solid products were soon identified by X-ray diffraction spectrometry (XRD, Bruker D8 Advance diffractometer with Cu Kα) at a scan rate of 4° min−1.

After impregnation, the wet solid samples were dried at 375 K for 24 h followed by calcination in air at 1123 K for 6 h to obtain the oxide catalysts.