Sentence examples for well sections from inspiring English sources

Well lines, horizontal sections of the wells, and the principal direction of anisotropic permeability should be parallel or perpendicular to each other, in which the horizontal well sections are perpendicular to the direction of the maximum principal permeability.

Unlike the leak-off testing (LOT) in deep wells, the LOT plots from shallow well sections subsea are often inconclusive due to the lack of an obvious point of deflection from their initial linear behavior.

The area of drill string (Well sections 1 and 2) is circular and its inner diameter is the same as the hydraulic diameter, D h.

Finally, the simulating conditions are unaltered until 50 s to converge to steady state defined by 280 gpm for all well sections.

Fractures seen on the outcrops, excavations and well sections were studied during the field visits, and most of the fractures are trending NNE SSW and NS (Rajaveni et al. 2014).

According to these information, in addition to screen and lifting pump position in well sections, the aquifer system within the area is subdivided into three aquifers: first aquifer (shallow), principal aquifer (semi-confined), and deep aquifer (confined) (Fig. 6).

Azimuth is most influenced, followed by length, and lastly diameter of radial well section.

The Well section of The New York Times is starting a new online featured called Ask Well.

On the contrary, fracture at shaft linings of vertical well section is easily occurred.

Reduced length and diameter of radial well section as well as reservoir permeability and properly increased azimuth of radial well are conducive to fracture at the toe end of the radial well section.

When there existed natural fractures in the reservoir, the intersection between fracture section and radial well section firstly shows fracturing.