Sentence examples for weld shear from inspiring English sources
All specimens experienced failure associated with weld shear or shear failure in the heat affected zone near the weld.
The weld shear strength of copper brazing is up to 480 MPa, and the brazability reaches the best.
However, since the failure mode is weld shear and not shear lag tension, it is not possible to quantify the extent of this conservatism.
The analytic solution is provided for any possible typology of loading acting on a spot weld (shear, bending and orthogonal loads).
The effect of electroless plating parameters (pH values, copper sulfate concentration, and reaction temperature) on brazability of cemented carbide to steel was investigated by testing the weld shear strength between the cemented carbide and steel substrate.
Test results showed that significant composite action is developed using puddle-weld shear connectors and their behaviour meets the serviceability and ultimate strength requirements for residential applications.
For these reasons, a form of shear connector other than welded shear studs is of interest.
Alongside these, a welded shear stud specimen, and a non-composite specimen were tested for comparison.
To enhance the bond strength, welding internal ring(s) onto the inner surface of the steel tube is the most effective method, followed by the methods of welding shear studs and using expansive concrete.
Two blind bolt connector types were used as shear connection systems in steel-concrete composite beams alongside a welded shear stud specimen in both cast-in and retrofitted configurations.
Most of the research in this area is concerned with modified versions of welded shear studs or various threaded rod and nut configurations and refers to only one type of shear connector.
