Sentence examples for weld failed from inspiring English sources

The first piece RTR completed was mounted on the crane that collapsed on East 91st Street when a weld by RTR gave way, though Mr. Lomma's lawyers have questioned whether the weld failed because of manufacturing flaws or other factors.

Fatigue specimens containing weld failed at both base metal and in the weld indicating that there is some competition between weld cyclic fatigue strength and stress concentration effect at the weld fusion zone.

The first occurred in 2011 near Little Buffalo, Canada, when a 30-year-old weld failed on a pipeline laid in 1966.

If the weld fails either one of these tests, you need more practice.

Scanning electron and optical microscope images of the failure surfaces and cross sections showed that the gas metal arc welds failed in a ductile necking/shear failure mode.

Two distinctive failure modes were observed; (a) at maximum fatigue loads at and above 1500 N, the welds failed due to interfacial failure through the weld nugget and, (b) at maximum fatigue loads below 1500 N, the welds failed due to kinked crack growth through the top aluminum sheet.

Keep welding more scrap steel if your welds failed the test described above.

Mostly, this is for the benefit of inexperienced welders, in that there'll be something to fall back on in case one (or several) welds fail.

The specimens cut from coupons with shorter weld lengths failed near the weld root whereas the specimens cut from coupons with longer weld lengths failed near the weld toe.

Tanks designed to fail at the roof/wall weld have failed at the base/ wall weld because this weld was corroded or fatigued or because holding-down bolts were missing.

Experimental results showed that specimens subjected to bidirectional loading suffered severe damage, caused by the weld fracture at the corner of panel-to-diaphragm weld, and failed at 0.06 rad and 0.04 rad story drift for specimens with panel aspect ratio of 1.4 and 2.0, respectively.