Sentence examples for weight of the disc from inspiring English sources

weight of the disc before swelling.

weight of the disc after drying.

The FE model revealed that the weight of the disc should be reduced optimally by using a non-uniform thickness because this results in a huge increase in the applied stresses.

In trying to reduce the weight of the disc rotor, it is necessary to achieve a design with a good balance of performance capable of satisfying all of these requirements.

The absorbed amount was calculated according to the following equation: Water uptake  = [(W t  −  W0)/ W0] × 100%, where W t is the disc weight at a given time point and W0 the initial weight of the disc.

These three fingers alone should be enough to hold the weight of the disc and to give you the power and control you need.

Basic density was obtained by dividing the oven dry weight of the discs (with and without bark) by the relevant saturated wood volume [54,55].

Basic density was obtained by dividing the oven dry weight of the discs (with and without bark) by the relevant saturated wood volume [ 54, 55].

weight of the swollen disc at time t.

weight of the swollen disc after 30 days.

where Wp is the weight of the dried disc and Wm is the weight of the two monomers mixture, for all the compositions the gel fractions were > 98%.