Sentence examples for weight of substrate from inspiring English sources
The highest FPA, Avicelase and CMCase activities were 11.648, 99.756 and 94.210 U/g dry weight of substrate (DWS), respectively.
About 9 × 1010 cells/g fresh weight of substrate could be removed by manual shaking, 21%; more than by shaking horizontally, and 10%; more than by sonication.
Total substrate consumption was calculated as initial dry weight of substrate minus neutral detergent fiber (NDF) residue (equivalent to plant cell wall residue).
The MAHT of SSB at 10 to 15%% by weight of substrate concentration and 121 °C0.5) °C for 30 to 120 min of isothermal treatment retention time resulted in about 70.42 (±3.41) % solids recovered after the treatment.
The SAHT of SSB, at 10 to 20 % by weight of substrate concentration and 121 °C0.5) °C for 30 to 120 min of treatment retention time, resulted in about 75.32 (±1.51) % solids recovered after the treatment.
Conductive PANI nanofiber-covered nano/micro wires were designed between the dielectric homo-PEG channels via controlling the effective parameters, including the molecular weight of substrate building blocks, mixing with dielectric PEG chains, and arranging different channels in the vicinity of each other.
The substrates were allowed to dry in the sun for 10 days and regularly (daily) weighed for five consecutive days to determine the change in the air dry weight of substrates.
Incorporation of caprylic acid was higher when reactions were carried with 10% lipase of the total weight of substrates with a 1 4 mole ratio of oil and caprylic acid.
The effect of four factors [i.e. X1 (dihydrocaffeic acid to hexanol molar ratio of 1 0.5 1 2); X2 (immobilized-enzyme amount 15 35% by the total weight of substrates); X3 (reaction time of 24 72 h) and X4 (reaction temperature of 40 60 °C)] were selected for the synthesis of hexyl dihydrocaffeate as a response variable and was assessed using RSM (Table 4).
After 120 h of pre-composting, 20 clitellate earthworms of L. rubellus having average live weight of 3.92 g were introduced to each setup containing 2,000 g (on wet weight basis) of substrate material (adapted from Kaviraj and Sharma (2003)).
After cooling, each bag was spawned with 10% (w/w) mushroom mycelia grown on cottonseed hulls on a dry weight basis of substrate.
