Sentence examples for weight of clay from inspiring English sources
The amount of armature required depends on the height of the relief and the weight of clay involved.
BC and OPC were mechanically mixed with clay in five different dosages, i.e. 1.0%, 2.5%, 5.0%, 7.5% and 10.0% by using dry weight of clay, separately.
It was observed that the maximum stress strength would be attained for nanocomposite films with 6% (by weight) of clay loading.
The prepared foams had 0.0% to 1.0% by weight of clay.
The results showed that the adsorption capacity increased greatly with increasing the weight ratio of clay to CS from 0.1 to 0.2, and then decreased when the weight ratio up to 0.3.
In order to increase the adsorption capacity of cationic starch and avoid the loss of cationic groups, novel and cost-effective cationic starch (CS) intercalated clay composite matrix was prepared by controlling the weight ratio of clay and CS.
Reactive dye (brilliant blue X-BR) was used to study adsorption behaviors of the matrix under various parameters such as weight ratio of clay to CS, initial dye concentration, contact time and temperature.
Therefore, the aim of this study is to evaluate/estimate the electrical conductivity of sand-kaolinite mixed soils with varying weight fraction of clay particles (CF=0 100%) at varying pore water conductivities (σw=0.013 3.356 S/m).
Polymer/clay nanocomposites have been observed to exhibit enhanced mechanical properties at low weight fractions (Wc) of clay.
The second group would be graded solely on quantity -- literally, by weight: 50 pounds of clay would get an "A," 40 pounds a "B," etc. Can you guess which group made the better work?
A constant 2% percentage (by weight) of cement in clay with three different ratios of sodium silicate (1%, 1.5% and 2.5% by weight of dry soil) were mixed with three different percentages of slag (3%, 4% and 5% by weight of dry soil) and tested based on curing times of 7, 14 and 28 days under three types of vertical load, being 50 kPa, 150 kPa and 250 kPa respectively.
