Sentence examples for weight fraction for from inspiring English sources

Similar phenomenon had been observed for other levels of LWF weight fraction for these composites.

According to the results shown in Figures 1 and 2, the optimum amount of MWCNT for tensile and flexural moduli was obtained almost at the identical weight fraction for tensile and flexural strengths.

It is indicated that by increasing the value of GPL weight fraction for the U-GPLRC and O-GPLRC nanoshells, the significance of the both nonlocal and strain gradient size dependencies reduces, while for the X-GPLRC and A-GPLRC nanoshells, it increases.

For the WWT study, LOD by dry weight varied between laboratories, so the value appropriate to each sample was used and then converted to a LOD by wet weight by multiplying it by the dry weight fraction for each sample.

Different wet lay-up procedures were used to saturate dry fibers and the level of matrix saturation was also varied (weight fractions for fibers ranged from 0.4 to 0.67).

For polymer blends, ΔTg as a miscibility criterion was considered to obey the following relation: ΔTg = w1 ΔTg,1 + w2 ΔTg,2 where w1 and w2 are the weight fractions for polymer 1 and polymer 2, and ΔTg,1 and ΔTg,2 are the glass transition widths for polymer 1 and polymer 2, respectively.

The compressive strength of neutralized SPHs decreased monotonically with AA concentration, while the maximum swelling was observed around the AA weight fraction of 0.4 for all PEI concentrations.

We present a mathematical model that may predict average molecular weights and weight fraction of solubles for polymer chains subjected to irradiation, where both scission and crosslinking are present.

The weight fraction of the skeleton for each metastatic hotspot is calculated, and the BSI is calculated as the sum of all such fractions.

Crystal growth rate (G) decreased with increasing weight fraction of PMMA (φPMMA) for PVDF/at-PMMA and PVDF/syn-PMMA blends.

Evidently HD of PAA-CNPs belonging to the same MW is nearly constant in the aforementioned range of weight fraction of PAA used for the adsorption experiment.