Sentence examples for weight contribution from inspiring English sources
For each country the optimal offshore wind sites are assessed under multiple weight contribution scenarios, reflecting the characteristics of market design, regulatory aspects or renewable integration targets.
This paper experimentally and numerically investigates the weight contribution of the liquid cooling system for power electronics converter in future aircraft.
The optimum parameters (Q = 8 LPM with 9.5 kg pump weight) for most promising coolant (fuel) that give high extraction rate with low weight contribution for the highest density cooling system are indicated.
The practical maximum discharge capacity of the active Co is 495 mAh g−1 after deducting the weight contribution of CNTs, which is about 280 mAh g−1 higher than that of pure Co.
The findings in the present study are useful during the selection the heat sink geometry to make certain the applied conditions (fluid flow and working coolant) and heat sink design configuration yield the highest heat transfer and the lowest weight contribution.
In other words, the reduction of M S may be ascribed to weight contribution from the nonmagnetic PEG in the composite as described by Tian et al. [53].
The full-width, half maximum (FWHM) estimates of concentrated, high-amplitude lifetime contributions were 270 430 ps, whereas those of broad low-amplitude (lower weight) contributions ranged from 1100 1200 ps.
This weighting can also be necessary for building view-independent texture models: smooth blending between multiview images may be obtained by weighting contribution of each triangle according to its viewing angle and the size of its deformation in the shape-free image.
With equal weights' contribution, the relationship between these behaviors and the produced output, PersistenceCompetency, is described by the following fuzzy if-then Sugeno first order rule (The output or consequent part is a nonfuzzy first order linear equation) (Jang and Sun 1995): Rule R i : if (DecisionMaker is IniClusteri) and (ProblemSolver is In2Clusteri) and (Leader is In3Clusteri).
Thus, yellow poplar is the major cellulolosic substrate based on its dry-weight contribution to the mixture.
The F-score (balance precision and recall) was around 92% (weighting contribution of many classifiers, from 82 to 87%) for task 2, and the F-score was 29% for task 3 with pattern-based approaches [ 18].
