Sentence examples for weight content and from inspiring English sources
The weight content and atom content of specific elements of different columns are shown in Table 1.
Short randomly oriented fibres/bio-based epoxy composites were manufactured by hand lay-up method followed by compression moulding, varying both fibres weight content and length.
Treatment significantly reduced the diameter and increased the echogenicity and dry weight content and enhanced the maturation rate of the tenoblasts, fibrillogenesis, collagen fibril diameter, fibrillar density, tensile strength, and stiffness and stress of the injured tendons.
High-density and low-density polyethylene (HDPE and LDPE) were melt-blended with the intent of building a morphological model from the unit cell level as a function of weight content and heat treatment.
For a polyphasic alloy, the total measured electrochemical discharge capacity would equal to the sum of the contributions of all phases as: C_{text{measured}} {mkern 1mu} {mkern 1mu} ( {text{mAh/g of alloy)}} = sumlimits_{i} {x_{i} } C_{{phi_{i} }} (2 where x i and (C_{{phi_{i} }}) are, respectively, the weight content and the electrochemical discharge capacity of the phase ϕ i.
Recently, Kim [10] extended this model by introducing several parameters (user propagation weight, content interestingness, and decay factor) to provide a more general and practical information diffusion model.
Kim [10] extended this epidemiological model by introducing several parameters (user propagation weight, content interestingness, and decay factor) to provide a more general and practical information diffusion model.
The encapsulation efficiency was greater than 94%, the drug weight content approximately 10% and the yield in the 72.5 90.0% range.
However, paradoxically, only the use of A2-PEO100 A2-PEO150150 as reactive grafts affords water-soluble dendrigrafts due to higher PEO weight content (respectively, 41 and 36%).
The influence on the mechanical and thermal properties of the biocomposite in relation to the length and weight content of silk fibers is studied in this paper.
Through the micro-hardness test, optimized fiber length and weight content of silk fibers used to make a better strength silk fiber/PLA biocomposite was determined.
