Polishing, though effectively reducing fibrosis, therefore results in a significant increase of the YAG-LCT rate due to weakening collagenous edge sealing [ 11 ].
Holes should not be too close together as to weaken the edge of the plates.
They also found that the sharpness of the drill bit edge weakened, if used number of times.
A semi-analytical post-processing method, termed the equilibrium/compatibility method here, is used for computation of hitherto unavailable through-thickness variation of transverse shear stresses in the vicinity of the circumferential re-entrant corner line of an internal part-through elliptical cylindrical hole weakening an edge-loaded rectangular plate.
The equilibrium/compatibility method, which is a semi-analytical post-processing method, is employed for computation of hitherto unavailable through-thickness variation of interlaminar (transverse) shear stresses in the vicinity of the bi-layer interface circumferential re-entrant corner line of an internal part-through circular cylindrical hole weakening an edge-loaded laminated composite plate.
A semi-analytical post-processing method, termed equilibrium/compatibility method here, is used for computation of hitherto unavailable through-thickness variation of transverse shear stresses in the vicinity of the circumferential re-entrant corner line of an internal part-through circular cylindrical hole weakening an edge-loaded plate.
Figure 6 illustrates the three cases: the original network (representing the normal, healthy state), the same network with some edges weakened (an early disease state), and, finally, a disconnected network (the late disease state).
If you want, you can undermine the pavement adjacent to the patch so the new patch material will support edges weakened by the event that caused the original pothole.
The same regions at 0° polarization show a reversed trend - the ratio at the vertical edges weakens while the horizontal edges of the cells become superior.
This formulation gives invariance to illumination changes and shadows because the edge information helps in discriminating a FG occluding object, that introduces different edge information in the scene, and a (light) shadow, that only weakens the BG edge information.
