Sentence examples for weak interface with from inspiring English sources
The results suggest a relatively weak interface, with adhesions typical of those found for metal/oxide interfaces subject to weakening by segregation.
Likewise, improving the commonly low wettability of nanoparticles, which may result in weak interfaces with the metallic matrix, is another technological barrier that requires further development.
The Mori – Tanaka (MT) micromechanics in conjunction with weak interface (WI) theory has been developed for the mathematical formulations of the viscoelastic modelling of CNTs-based polymer matrix phase.
In C/C-A, the fracture of CF-A at the wear surface was attributed to its hardness and indentation modulus being close to pyrocarbon as well as its weak interface bonding with pyrocarbon, which caused larger wear rate and thicker friction layer at the surface of C/C-A.
Composites with weak interface show essentially no change in glass transition temperature (Tg) and damping with filler contents, while composites with strong interface show an increase of Tg and a decrease of damping with filler content.
The present analytical results can be degenerated to the ones for a system with perfect interfaces, as well as those for a bilayer system with weak interface as reported previously.
The results showed that UD CF/PA6 laminates with weak interface but high Mode II interlaminalr fracture toughness mainly exhibited step-like fracture modes (77%) in interfacial fracture mode (Adhesive failure), while CF/Epoxy laminates with stronger interface but lower Mode II interlaminalr fracture toughness mostly showed splitting fracture mode (69%) in matrix fracture mode (Cohesive failure).
Beak microstructure is characterized by a lamellar arrangement of the constituents, with a weak interface that promotes crack deflection and endows the structure with high fracture toughness.
As the detection result illustrated in Fig. 10(b), only a short length of crack is converged with the weak interface when the dosage of VMA is increased to 1.0%.
A new multilayer composite with a super-plastic layer, a hard layer and a weak interface was proposed.
Here, we refine and expand the model proposed by Stormo et al. (2013) with the attempt to describe fracture development along a pre-existing weak interface.
