Sentence examples for wavelength plot from inspiring English sources
The bandgap of the Mn-doped ZnO thin film was calculated data of the transmittance versus wavelength plot.
Open image in new window Fig. 6 a UV Visible NIR spectra recorded showing absorbance versus wavelength plot for CZTS thin films.
Fig. 3 Transmittance vs wavelength plot for thin film by different volumes of Ag nanowire solution, and transmittance vs sheet resistance plot of silver nanowire film with different densities of Ag nanowires.
Figure 3 shows transmittance vs wavelength plot for thin film and transmittance vs sheet resistance plot of silver nanowire film with different density of the same aspect ratio Ag nanowires.
The wavelength plot is marked by two areas of strong correlation separated by flat regions in the red (λ > 600 nm) and green (530 < λ < 560 nm), with significant noise in the blue (λ < 490 nm) due to low signal levels.
(A) Photocurrent responses vs. wavelength plots.
Results are presented showing mode profiles; effective index versus propagation constant and wavelength plots; and modal attenuation due to power leakage.
The absorption coefficient α as a function of the incident wavelength is plot in Figure 7.
The dependencies of the peak absorption and scattering efficiencies on the excitation wavelength are plotted in Figure 3(a) for n=1.55.
The measured reflectance spectra of nanopillar arrays with different incident angles (40° to 70° in 10° increments) as a function of wavelength are plotted in Figure 3b.
In addition, the dispersion relations of nvp/c and nvg/c of GNW (a = 30 nm) versus wavelength are plotted in Figure 7a according to Equation 3. The α value of each longitudinal mode of GNR with different ARs (4 to 8) is also plotted for comparison.
