Sentence examples for water content excess from inspiring English sources

The vertical distributions of water content, excess pore pressure, and effective stress revealed that the degree of consolidation decreased with depth, since the drainage condition in the upper part was better.

Due to the density contrast and the solid flow, aqueous fluid is assumed to migrate as porous flow along the solid grain boundaries according to the pressure gradient, and if the water content is higher than the maximum water content, excess water is allocated to aqueous fluid.

Most fresh vegetables have a water content in excess of 70 percent, with only about 3.5 percent protein and less than 1 percent fat.

Polybutadiene cis-1,4 contents were consistently high for all polymerizations (ca. 98%) and were found to be independent of the water content and excess acid level.

In the present study, we investigated whether exogenous H2O2 could protect the growth and water content under excess copper and whether the protective effect was associated with the nutrient concentration and osmotic regulation in the leaf tissues.

(224) The melting temperature reaches its lowest level (about 58 °C in the case of potato starch) independent of water content if excess water is present.

Finally, the biodiesel was placed in a hot air oven and heated at 100 °C to remove excess water content.

(7) Finally, the biodiesel was placed in a hot air oven and heated at 100 °C to remove excess water content.  . 150 g of safflower oil was taken in a 250-mL glass vessel and preheated up to 105 110 °C to remove the moisture from the oil and then allowed to cool to 45 50 °C.

It is not unusual to find a small excess water content in these circumstances since crystals often occlude small pockets of mother liquor that are inevitably more water-rich.

This would, at the same water content, increase the amount of excess water for forming water films coating the solid particles to improve flowability, or at the same flowability requirement, allow the water/cementitious materials ratio to be lowered to increase strength.

Similarly, at high nitric acid content, excess NO3− ions will bind to water molecules and reduce their tendency to evaporate.