Sentence examples for was initially calibrated from inspiring English sources

For his proposed self-calibration scheme when the camera system was initially calibrated in air and then self-calibrated in water, he proposed the three interface model of Maas [6] and was able to accurately self-calibrate as long as the distance and misalignment between the window and the light sheet could otherwise be accurately inferred.

Activity injected in phantoms was measured with a dose calibrator (ACAD 2000, Lemer Pax, Carquefou, France) that was initially calibrated using a reference 124I source provided by IBA (Amsterdam, The Netherlands).

A generic system dynamics watershed (GSDW) model was initially calibrated using the onsite meteorological data, resulting in simulated soil moisture values that slightly overestimated observed values.

This engineering procedure was initially calibrated by using the standard curves supplied by Eurocode 3. Subsequently, an unifying value for the multiaxial critical distance was calculated by taking full advantage from the notch-stress intensity factor (N-SIF) approach.

The simple foot model was initially calibrated by adjusting the individual loads on the metatarsals to approximate measured peak plantar pressure distributions in the barefoot condition to within 3%.

In more detail, the MWCM was initially calibrated by using two standard curves: the first one, stated by Eurocode 9, suitable for assessing ground butt welds subjected to uniaxial loading, whereas the second one, suggested by the International Institute of Welding (IIW), suitable for estimating fatigue strength of aluminium welded details loaded in torsion.

Mass spectra were initially calibrated in closed external mode using Peptide Calibration Standard II (Bruker Daltonics) and sometimes in internal statistical mode to achieve maximum calibration mass accuracy.

Mr. Rippey noted that a number of Democrats had received absentee ballots that did not include the Rippey-Moskowite race and that the vote-counting machines were initially calibrated incorrectly, so they could not recognize some types of ink.

The joints were initially calibrated using existing experimental data – to ascertain the validity of the numerical model used – and then parametric studies were carried out using different steel fibre ratios coupled with increased spacing of shear links.

Optical density (OD) measurements were initially calibrated against the cell number (Additional file 1: Figure S4) such that 1 OD corresponds to 5.4 × 107 cells (0.366 g DCW/L).

Both growth chambers were initially calibrated at low temperature of 30°C and high temperature of 34°C.