Your English writing platform
Discover LudwigExact(26)
The stress applied to the specimen was increased in steps of 5.4MPa.
Starting from a low value, k s was increased in steps and the simulation was repeated until a reasonable agreement between the measured and predicted pressure loss (maximum 5% difference) was observed.
Permeability and porosity were measured at each step as confining pressure was increased in steps from 1 to 40 MPa, and the duration before starting the permeability tests after changing the confining pressure was about 5 to 10 min. Typical permeability and porosity behaviors in the cyclic effective pressure tests are shown in Figure 3.
IAP was increased in steps of 5 mmHg with regard to the insufflator readings until the target pressure of 15 or 30 mmHg, respectively, was achieved and was maintained throughout the examination using this automatically controlled insufflator (Electronik-pneu, Karl Storz, Tuttlingen, Germany).
Ca2+ was increased in steps.
When cultures had adapted to replication in the presence of a particular concentration of DEB025 (i.e. no more massive cell death) the concentration was increased in steps of 0.21 µM (typically every 3 passages).
Similar(34)
In order to verify the reliabilty of τ, the starting time of the fit was increased in step of 50 µs; in each step the fitting procedure was applied (up to 10 steps) and τ was calculated as the average value.
The standard deviations may also be increased in steps of 0.2.
They showed that network size can be increased in steps, keeping the same number of keys per node.
In a similar approach to thermal demagnetization, an AF can be increased in steps and if the resulting magnetization at each increasing AF step decreases linearly to zero, a ChRM inclination and declination can be calculated.
The magnetic field has been increased in steps from the gun and over the first five magnets varying from Brillouin field (BB) value to twice BB for achieving the electron beam with scalloping less than 10%.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com