Sentence examples for w scan from inspiring English sources

The appropriate laser sintering parameters are attained in this paper: laser power 50 W; scan speed 85 mm/s; and hatching space 0.6 mm.

where is the support band of the collected responses from the p th target along the w scan direction.

The verification parameters were randomly selected within the range of ANN training datasets: laser power 300 700 W; scanning velocity 1000 5000 mm/min and stand-off distance 20 50 mm.

A number of heat treatment experiments by changing the laser power (1400 1800 W), scanning speed (15 25 mm/s), size of overlap (1 6 mm), and the length of scan (10 30 mm) on the tool steel AISI S7 were carried out by using a 2-kW direct diode laser.

The effects of laser power (750-1 250 W), scanning speed (1 000–3 000 mm/min) and focal point position (from −10 to −30 mm) on the heat input, and hardened-bead geometry (i.e. hardened bead width (HBW), hardened depth (HD) and angle of entry of hardened bead profile with the surface (AEHB)) were investigated using response surface methodology (RS M.

First, correlation experiments of single-track laser cladding TC4 powder on TC4 substrate were carried out based on central composite design (CCD) with the cladding parameters, laser power (400 600 W), scanning speed (500 700 mm/min) and powder feed rate (30 60 rev/min).

This investigation focuses on the influence of laser power (400 600 W), scanning speed (500 700 mm/min) and powder feed rate (30 60 rev/min) on the shape factor and the cladding-bead geometry (layer width, layer height and molten depth) with regard to injecting Ti6Al4V (TC4) powder on TC4 substrate.

In order to provide further evidence of this relationship, we used the E-W scans made by AMISR-14 for August 3 4 to create two-dimensional "images" of the scattering structures in the magnetic equatorial plane.

T1-W hypointense WM lesions were defined as those lesions with signal intensity between that of the grey matter (GM) and the cerebrospinal fluid (CSF) on T1-W scans [16].

Acting Public Services Ombudsman for Wales Prof Margaret Griffiths found the health board failed to: Record a significant clinical discussion with Mr W about scan results.

Based on the highest grey relational grade, the optimized processing parameters are determined at laser power of 3 W and scanning speed of 100 mm/s.