Sentence examples for voltage of work from inspiring English sources
The acceleration voltage of work was 5 kV with magnification up to 1050×.
An explicit analytical model of surface potential profile and threshold voltage of work function engineered gate (WFEG) recessed source/drain (Re S/D) MOSFET has been presented in this paper.
It is worth mentioning that the turn-on voltage of this work is much lower than that of previously reported AlN-buried MC emitter (~7 V) due to the good current spreading capability of ITO and the lower deposition temperature of SiO2 aperture comparing with the growing temperature of AlN, which would not cause unwanted damage to the InGaN MQW [16].
The addition of SACNT had little effect on the forward voltage in the view of work function.
Progesterone-loaded zein fibers prepared by electrospinning were spun using a voltage of 24 kV, working distance of 12 cm, and feed rate of 2 μL min−1.
For WDS measurements of Mg, P, Zn, As, Sn and Sb the conditions were as follows: high vacuum, accelerating voltage of 25 kV, working distance 10 mm.
EDS measurements were carried out in low vacuum mode under a pressure of 50 Pa and accelerating voltage of 20 25 kV, working distance —10 mm, acquisition time from 35 to 100 s.
The SEM analysis was performed on electron microscope, model LEO-1430-USA LEO-1430-USA LEO-1430-USA seconditionsectrons (ES) with beam current ofor0 μA at constant voltage of 20 kV, workimagesstance of 15 mm; AC2 secondaryelectronsd with a thin layES of platinum in sputter Emitech K550-USA.
The SEM experiments were performed using a Zeiss electron microscope with the working voltage of 15 kV and the working distance 10.5 mm.
The work voltage of the A2# is 1 V lower than that of A0#, while the work voltage of the B2# sample is 1.5 V lower than that of B0#.
K = △V/Vconventional, where the △V represents the work voltage difference between the PC LED and conventional LED and the Vconventional stands for the work voltage of the conventional LED at I = 20 mA, respectively.
