Sentence examples for voltage may be from inspiring English sources

Because the effect dies away when constant voltage is applied, an alternating voltage may be used to create a sustained light emission.

Results show that parameters such as the response time or even the equilibrium open circuit voltage may be strongly dependent on the characteristics of the testing system.

With the use of buck-boost converters, the amount of output voltage may be set to higher or lower than the input voltage, enabling us to maintain the desired output voltage.

The results show that for an irreversible reaction the apparent transfer coefficient determined from the slope of a plot of the inverse of the low frequency limit of the impedance versus the dc bias voltage may be nonconstant and vary with A. The impedance for an ideally blocking sinusoidal-shaped electrode is also presented.

That L-Z-398 cannot form electromer under a high voltage may be because the L-Z-398 cannot stably form L-Z-398+ component and L-Z-398− component simultaneously due to the too strong electron-withdrawing ability of the four 2,3,5,6-tetrafluorophenyl 2,3,5,6-tetrafluorophenylarbazole.

For these reasons, on the one hand, the applied voltage may be still not high enough.

For instance, if a lightning surge enters an unprotected residence by way of an electric power line, the voltages may be large enough to cause sparks in the house wiring or appliances.

The optimal branch voltages may be calculated directly as shown in Fig. 6.

Smaller turn on voltages may be achieved in the case of GaAs/AlAs/GaAs/AlAs/GaAs core-shell NW RTDs due to the larger effective mass, but doping is required so that carriers are available for resonant tunneling.

Obviously, not all PD pulses are characterized by very a rapid rise-time; with a high probability of occurrence of a free electron within the gas of occluded cavities, only small or moderate over-voltages may be required to precipitate a breakdown event.

Larger power transformers operating at high voltages may be wound with copper rectangular strip conductors insulated by oil-impregnated paper and blocks of pressboard.