Sentence examples for void length from inspiring English sources

This paper presents a minimum void length scale control method for structural topology optimization.

The dimensionless void length is proposed as a single parameter that determines universal behaviors of slip length.

To the authors' knowledge, the void length scale control was rarely studied under the level set framework.

Sensitivity of the predictions to void length and void sector angle are both deemed to be significant.

The wet volume fraction of voids and the void length parallel to the fibre axis decreased with increasing cycle number.

Optical studies by Morshuis et al. revealed a large number of separate discharging sites dependent on the void length [7, 40].

Besides, as internal coagulant flow rate increases, the mass transport at the outer surface increases, while that at the inner surface is minimized, resulting in an increase in the macro-void length.

Therefore, it is very important to predict accurately the void penetration length in the SP during a LOCA.

The developed correlations consider a bubble plume developed in a liquid medium as a lumped model and use the field equations with necessary assumptions to determine the equation of void penetration length.

However, the existing models or correlations to predict the void penetration length in a water pool have been developed using test data with small diameter submerged tubes less than or equal to 3.5 cm.

The void penetration length in the SP is considered as a key parameter to design an alignment of Emergency Core Cooling System (ECCS) pump suction pipe in a pool for avoiding the problem of the gas intrusion to the pump.