Sentence examples for viscosity standard from inspiring English sources
This paper addresses the relevant procedure on the realisation of the Italian kinematic viscosity scale (viscosity standard) which was conducted over a number of years.
The Indonesian National Standard has set the standard viscosity for biodiesel which is in the range of 2.3 to 6.0 cSt, while the ASTM viscosity standard for biodiesel is 1.9 to 6.0 cSt.
The ASTM kinematic viscosity standard for biodiesel is 1.9 6.0 cSt (mm2 s−1), and the kinematic viscosity of the sea mango biodiesel is in the range of 2.89 3.01 cSt.
The water was used as a low viscosity standard stimulus.
The bead magnetic moment constant was calibrated in a viscosity standard by rotating the beads in the fluid and measuring the bead angular strain and determined to be 0.12 Pa per Gauss magnetic field.
Here we sinter ash-size fragments of a synthetic National Institute of Standards and Technology viscosity standard glass at temperatures at which the resultant melt has a viscosity of ∼10 10 Pa .sat 1bar to assess sintering dynamics under near-surface volcanic conditions.
Before being set into operation, the apparatus is calibrated in a range up to 500 bar with viscosity standards that have been independently measured to high-pressure conditions.
These MEMS resonators are characterised by electrical and optical measurements in air and in several liquids (i.e., isopropanol and viscosity standards: D5, N10, N35, N100, D500).
The viscometer was calibrated using several viscosity standards based on a maximum standard deviation of 0.5% in all measurements for the three pistons used.
Three waxy crude oil samples obtained from Niger Delta region of Nigeria were characterized to determine their wax deposition tendencies, pour point, American Petroleum Institute gravity (APIg), wax content and viscosity using standard methods.
The paper also reports predicted and experimental results for shrinkage of a wax-free high viscosity Newtonian standard fluid in a steel model pipeline, which indicate that gradients of reducing pressure are a general phenomenon associated with high flow resistance during cooling in pipes.
