Sentence examples for viscosity of the sample from inspiring English sources

where M d is the actually measured torque acting on the rotor, M is the torque used to calculate the viscosity of the sample, taking into account the effect of friction characteristic of the measurement geometry.

However, the viscosity of the sample with the sonication time of 1,355 min displays a more flat viscosity variation with an increasing shear rate; moreover, at higher shear rates, its viscosity approached that of the base fluid.

Therefore, as the viscosity of the sample increases so will the consistency.

Therefore, the bulk viscosity of the sample is represented by the loss modulus [ 14].

If slow filtration is caused by high viscosity of the sample solution, boil until the viscosity is reduced enough to permit filtration.

All the aforementioned residues influence the viscosity of the sample, and accordingly affect the acquired transverse relaxation signal.

From now on we refer to these samples as chigh=0.15 mg ml−1 and clow=0.02 mg ml−1, where the indices refer to the viscosity of the samples.

The electrical capacitance, total polar compound (TPC) and viscosity of the samples were measured for analysis.

The addition of caseinates caused the viscosity of the samples to increase and their flow behaviour index values to decrease.

Temperature, microbial load, pectate lyase activity, colour and viscosity of the samples homogenized at increasing pressure were evaluated.

The crosslinking kinetics of PPF/mPOSS was characterized using the gel fraction and rheological properties such as storage modulus and viscosity of the samples crosslinked for 0.5 5 min.