Sentence examples for venting size from inspiring English sources

The DTVS model is established in the GOTHIC model based on the venting size, venting piping loss, venting initiation time, and venting source.

The effects of vent size, number, and location were investigated using three different vent combinations.

The amplitude and duration of this pressure peak vary depending on the enclosure volume, vent size and leak flow rate.

The effects of ambient air temperature, vent size, and ceiling insulation on heating load and ice dam formation are investigated.

The influence of gas equivalence ratio and vent size on the rate of pressure rise is analyzed.

Vented explosion experiments of ethylene-air mixtures were conducted in a custom-designed 2 × 1.2 × 0.6 m3 steel chamber under three vent conditions to study the effect of vent size and vent type on overpressure under different concentrations.

The tests were focused on the effect of gasoline vapor concentration and vent size on the pressure development and the flame behavior inside and outside the vessel.

In this research, a large-scale experimental programme has been undertaken at the DNV GL Spadeadam Test Site to determine the effects of vent size and congestion on vented gas explosions.

It was found that the inner flame propagation speed was mainly dependent on the initial concentration, while the maximum flame spreading distance was mainly influenced by the vent size.

In addition, it is suggested that increasing vent size results in higher ventilation air flow rate but barely affects the attic heating load, and that both sufficient ventilation and insulation are needed to ensure the proper functions of the attic and its energy efficiency.

The full AFC-BSS combination has been evaluated for a vent size of 2 mm, in the low-reverberation chamber as well as in the living-room-like environment (Section 5.3). Figure 7 depicts the BSS and AFC performance obtained after convergence.