(Others confirmed that Ms. Finke's brand of high-engagement, high-velocity content is coveted by other media outlets).
Factors affecting the desulphurization capability of molding semi-coke were studied, including gas temperature, space velocity, O2 content and H2O content in flue-gas.
The results indicate that impact velocity, filler content, impingement angle and erodent size influence the wear rate significantly.
The effects of the key operating parameters (fluid flow velocity, particulate content and gas volume fraction) have been evaluated by a two-level design of experiments approach.
Factors like sliding velocity, filler content and normal load, in this sequence, are the significant factors affecting the specific wear rate.
The results indicate that impact velocity, filler content, impingement angle and erodent size are the significant factors in the order of their influence on wear rate.
The optimal operating conditions are as follows: temperature 60 80 °C, space velocity 600 h−1, oxygen content 5% and H2O content 8%.
"There is a velocity to this content," says Lewis. "Tweets are the gold standard of scoops.
Increased gas velocity and fines content act to delay the onset of streaming, but cannot completely eliminate it over the range of velocities examined.
The results indicate that erosion wear rate of this composite is influence more by impact velocity and filler content respectively compare to others factors.
The ANOVA results showed that the load was a significant factor in the wear rate, while the sliding velocity and TiC content of the composite were not.
