Sentence examples for valve switch from inspiring English sources

The valve switch itself is far from novel, but the idea of putting one into a microfluidic device tremendously enhancing the value of the tool had never been done before.

The tower consists of the seven sub-assemblies: the Base, the Pneumatic Compressor, the Pneumatic Valve Switch, the Tower frame, the Turntable Base, the Pressure Limiter (Polarity) switch, and the Turntable Drive sub-assemblies.

We find that the magnitude of the pressure drop at the inlet of the second dimension column during the valve switch, which may vary between 10 and 95% of the column inlet pressure, is dependent on valve switching speed and design, and has a dramatic impact on column lifetime.

After the experiment, the fluid in the chamber was gradually released by controlling a valve switch.

A home made manifold having virtually no void volume and very narrow connecting tubes prevented backward flow upon valve switch.

The valve switch time was optimized for maximum signal of AFB1.

Energy consumption is only required during the valve switching.

Valve switching is initiated by melting of paraffin through heating, with an additional pneumatic pressure used for valve switching from open to closed state.

Indoor and outdoor concentration measurements were facilitated using a valve switching system.

Valve switching to bypass should be produced immediately after the arrival of the end of the sample plug to the valve (tV).

The control circuit is used to regulate the electromagnetic valve switches, causing thin PDMS membranes to deflect pneumatically by the compressed air and generate valving and pumping effects.