Sentence examples for value of the solid from inspiring English sources

Considering yield and heating value of the solid semi-char product and the feeding problem, the best pyrolysis temperature was 400 °C.

Ash softening temperature and lower heating value of the solid fuel were increased through the IFFB process in comparison to the untreated raw material.

The deficiency of these models is that the obtained results are incompatible with the experimental observation as a large value of the solid volume fraction ϕ is chosen.

The flame propagation speed, i.e., the rate of progress of the apparent flame zone, is dependent on the air supply rate, the calorific value of the solid fuel, and the particle size.

In the cracked region, the phase angle of S AC/S AB (or S DB/S DC) almost linearly increases in a frequency range between 0 and about 45 kHz, in which the slope of the phase spectra is comparable to the theoretical value of the solid concrete with the surface wave velocity of 2200 m/s.

In 1957, Kissinger [40] first introduced a model-free non-isothermal method, which can help researchers to evaluate kinetic parameters without the need of calculating E for each conversion value of the solid-state reaction.

Fundamental gas solid reaction models such as the shrinking core model and the grain model are able to reproduce this phenomenon only introducing an arbitrary value of the final conversion or an adjustable value of the solid-state diffusivity of the gaseous reactant.

Orientations of the obstacle, values of the solid volume fraction, and Reynolds number are selected as the input parameters.

Considering the effectiveness of lead desorption from loaded biomass, we concluded that desorption was 100% effective and rapid, even for high values of the solid to liquid ratio, leading to high values of the concentration factor.

Although the capacity values of the solid device are lower than those of the comparable one with liquid electrolyte, the cyclability performances are promising and the cycle life is satisfactory.

This model appropriately recovers the free boundary problem for the motion of interface in the thin-interface limit and, importantly, it is applicable to the solidification process in binary alloy systems with arbitrary values of the solid diffusivities and interfacial energies.