Sentence examples for value of the penetration from inspiring English sources

The value of the penetration depth depends on the lay-out of the spiral inductor, but, critically, not on the substrate resistivity, and hence the one-port model maintains the proportionality between resistance parameter and substrate resistivity.

kern-0pt} s} )), U the absolute value of the applied voltage (V), T the average value of initial and final temperatures in the anolyte solution (°C), L the thickness of the specimen (mm), Xd the average value of the penetration depths (mm), t is the test duration (h).

Values of the penetration depth for the superconducting elements at low temperature lie in the range from about 390 to 1,300 angstroms.

Therefore, the A6 scenario yields the same data points for doubled values of the penetration rate φ.

Based on the experimental analysis, similar trends exist for the measured and predicted values of the penetration depth when coating non-Newtonian fluids.

The main distinguished feature of this algorithm is that the only two output measured data ⟨αi,Pi⟩, i=0,1, i.e. discrete values of the penetration depth (αi) and the loading force (Pi), are required for the reconstruction of the unknown Ramberg Osgood curve.

The differences between all mean values of the penetration modulus E are highly significant.

Under the condition of relative humidity (RH) 100%, the averaged saturation value of the MPL and MPL penetration part of the GDL with small macro-pore in the substrate is 18.8% higher than that of the GDL with large macro-pore in the substrate.

The nonlinear normal force between wheel and rail surface is solved using Hertz's theory [19]: F_{n} = C_{h} delta^{1.5} (20)where the constant C h depends from the contact surfaces bending and from material characteristics and δ is the value of the elastic penetration between the two bodies.

Figure 6 represents the value of penetration of the chlorides ions in different mortar according to the age of immersion in the solution from (5 % NaCl).

The highest value of the chloride ion penetration depth of the UPM was obtained for the mortar which used both EVA and SF.