Sentence examples for valid for the tested from inspiring English sources

Conventional correlations for predicting average heat transfer and friction factor in turbulent flow regime such as Gnielinski correlation and Mishra and Gupta correlation, respectively, for helical tubes are also valid for the tested nanofluids which suggests that nanofluids behave like a homogeneous fluid.

However, the comparisons made in the present study are only valid for the test conditions as some of the xylanases may have been dosed at levels below the biological optimum and others well above.

Thus, the analysis width is valid for the test signals as specified in Section 2. In the case of PSK signals, two consecutives symbols may be different from each other depending on the transmitted data.

Note that 3 of the 9 STRs originally typed were excluded from the analyses since two of them (DYS385a, DYS385b) were duplicated and phylogenetically indistinguishable (and thus not valid for the tests performed in this study), and another (DYS392) provided genotypes of marginal quality below the threshold of acceptance (90%) for inclusion in this study.

All reported levels of performance are valid for the test sets and reflect the expected performance for protein pairs never encountered before.

In summary, both ERs and STs may serve as appropriate response definition criteria; however, ERs need to be justified using data sets from control populations and are only valid for the test protocol used to define the thresholds for acceptance.

A questionnaire was pilot tested on 25 students before initiation of the survey, the objective of which was to identify the basic questions most valid for testing the comprehensiveness and relevance of our terms.

Furthermore, Equation (1) is valid for testing the main effect δ k itself when the genotype frequencies are correctly specified in the offset term (see Results).

A finite element analysis shows that both test methods underestimate the real ILSS and demonstrate that the standardized ILSS evaluation procedures are more or less valid for the SBS test, but require modifications in the case of the DLS test.

An important limitation of such experiments is that the results are only valid for the specific situation tested and any expectations for other situations have to be developed with care.

It was found that the Hall-Petch relation is valid for the four compositions tested: Cu-1.5 wt% Ti, Cu-2.7 wt% Ti, Cu-4.5 wt% Ti and Cu-5.4 wt% Ti alloys.