Sentence examples for using the selected conditions from inspiring English sources

Using the selected conditions, a GC MS method was fully validated for the quantitative determination of the 21 free primary aroma compounds.

Using the selected conditions, the limits of detection were 0.5 μg l−1 for Pb II) and 1 μg l−1 for Cd II) at a preconcentration time of 4 min.

Using the selected conditions, at a preconcentration time of 120 s the limits of detection were 0.7 μg l−1 for Cd and 0.9 μg l−1 for Zn and the percent relative standard deviations were 4.2% for Zn II) and 3.6% for Cd II) at the 20 μg l−1 level (n = 8).

In the case of contamination with corundum, it is impossible to make a statement about the nature of the surface using the selected conditions.

Using the selected conditions, formation of a major product with acceptable yields after 24 h was observed.

The suitability of the model equation for predicting the optimum response values was tested using the selected optimal conditions.

Based on the response surface methodology using the selected operating conditions, the optimal ratio of methanol to oil, amount of catalyst and flow rate of transesterification process were 10.74, 1.26 wt% and 1.62 mL/min, respectively.

Using the selected optimal extraction conditions, the different harvest time fruits of 0.5 g were accurately weighed and extracted at 60°C with 10 mL 70% ethanol for 30 min.

The enzymatic extract produced under the selected conditions was spray dried using different concentrations of additives (glucose, maltodextrin, and CMC).

The study uses a mental assessment test to record thermal stress for 203 cases and then predicts the thermal stress for the same conditions using the selected thermal indices.

Predictors were created by using a step function for the selected condition and convolving it with a hemodynamic response function (HRF; (Boynton et al. 1996).