Sentence examples for using the same coating from inspiring English sources

However, the 50% coating had a much poorer deposition rate leading to a much thinner coating using the same coating parameters; the porosity was much higher (about 4.5%).

Using the same coating method, a stainless steel grid gave comparable wire structures at 760°C (sample 9, Fig. 1b), showing that the support metal must have an as yet unknown electronic influence on the particles, the nature of which is the subject of ongoing study.

Using the same coating process, two coating architectures were deposited on the high speed tool steel and Si wafer, one starting with an Al N layer designed as the Al N/Cr N/…/Cr N/Al N (architecture A) and the other starting with a Cr N layer designed as the Cr N/Al N/…/Al N/Cr N (architecture C).

Use the same coat of Modge Podge, if desired, or pick another type of (matte, etc).

Each of the polyacrylate-coated discs (Borosilicate Glass Co. UK) were prepared from the same w/w concentration of polymer in solvent using the same dip coating programme, at a thickness of ∼2 μm.

For pol β experiments, a 1 nt gap was created by using the same DNA coating approach, and, in addition, a corresponding downstream complementary sequence (21-mer) containing a 5′-phosphate group (2 nM) was injected over the surface for 5 min. Kf-exo– was injected with or without dNTPs (100 μM) over the DNA surface in random order (neither ascending nor descending concentrations).

The glass substrate with the SiO2 spheres was immersed into the corresponding TiO2 precursor solution using the same vertical dip coating procedure at 1.5 mm/min rate.

In a first study, the total coating thickness was varied between 0 μm and 120 μm, using the same thickness for bond coat and top coat (since the thermal conductivity of both materials is assumed to be the same, varying the relative thickness of the two coatings does not affect the temperature profile).

Three coatings of each type were furnace cycled to failure to compare the average lifetimes obtained in dry O2, using the same superalloy batch and coating types.

Apply the top coat using the same technique you used with the epoxy coating.

Using the same process as cornstarch, coat the Vaseline with baby powder to absorb as much as possible.