Sentence examples for using the proposed mode from inspiring English sources

The paper concludes that by using the proposed mode selection, the network sum rate is improved by 50% and the ratio of successful D2D communications is more than doubled.

Using the proposed mode shape expansion and the input output balance procedures, along with the modal orthogonality relations, the mass and stiffness matrices of the system can be estimated.

Through the derivation of the equations for known input modal identification using the proposed mode shape scaling and parameterization scheme, the study provides insight into the relationship between the identified modal parameters and information required in the forced vibration test.

In typical applications of modal identifications, when there is sufficient amount of data, the formulation using the proposed mode shape scaling and parameterization scheme shows that it allows modal parameters to be determined efficiently in a globally identifiable manner.

In comparison to the conventional valve control system, an independent metering system could save energy without reducing the motion control performance using the proposed bumpless mode switch strategy.

As can be observed from Fig. 6, the value of R(S) evaluated using the two-mode SN model is significantly smaller than that using the proposed three-mode model for all the deployments in Table 4, exceeding 6% for some deployments.

Results also demonstrate the computational efficiency of the developed search algorithm used for calculating the proposed metric and the significant effect of using the proposed three-mode SN model on the accuracy of the evaluated reliability.

Fig. 6 Comparison between the reliability of WSN deployments in Table 4 evaluated using the proposed three-mode SN model and the two-model SN model adopted in existing studies in [8], [11], [14], and [16] for the deployment scenarios 1 through 5 (a e).

Hence, using the proposed approach, VCSEL mode selectivity and conditions necessary to maintain a desired single-fundamental-mode operation may be examined for a VCSEL design under consideration.

We show that using the proposed structure, a single-mode bandwidth of 17% can be achieved.

By using the proposed algorithm, the number of mode candidates can be reduced and the computational efficiency of H.264/AVC can be improved.