Sentence examples for using the procedures shown from inspiring English sources

For the deposition of patterned nanowire arrays on a solid substrate, the substrate was treated using the procedures shown in Figure 2. Initially, a thin conductive layer of Au/Ti (300 20 nm) was sputtered on the Si substrate followed by spin-coating of a thin layer (about 1.2 μm) of photoresist.

The kinetic curve of the CL reaction in the presence and absence of Triton X-100 was investigated with a static method, using the procedure shown in the experimental section.

Using the procedure shown in Fig. 11, it is necessary to make enough finite element models for different components of the tunnel support system to obtain design safety factors corresponding to the particular elements.

From each plot, the model parameters shown in Tables 1 and 2 for exponential, hyperbolic and developed models were determined using the procedure shown in Appendix A. Having substituted the obtained parameters shown in Tables 1 and 2 in exponential, hyperbolic and developed models, the production rate decline curves shown in Figs. 4, 56 and 7 were obtained.

Micrometre-sized nanowire patterns (both Cu and Ag) were fabricated on glass substrates, using the procedure shown in Figure 2. Electrodeposition had selectively taken place on the exposed metal area (which act as pads), initially defined by the lithography, due to the insulation of photoresist.

Differentiation of undifferentiated wild-type ES (WT-ES) or Math1-ES cells into HCs was performed using the procedure shown in Figure 2a.

We identified two case-control studies, one nested case-control study and two historic cohort studies using the procedure shown in Figure 1[ 19– 23].

We initialise the GA population with randomly generated valid structures using the procedure shown in Algorithm 7. As noted before, our GA uses a macro-mutation operator that tries to take the search towards forming a hydrophobic core.

To test this hypothesis, we used the procedure shown in Fig. 7 to compute saliency maps of a set of natural scenes and compared the predictions based on the saliency maps to human gaze in free-viewing these scenes.

The n-AlGaInP nanopillars with a height of 350 nm were fabricated using the same procedure shown in Fig. 6a, c.

Motif pairs were classified into three classes using the following variables and the procedure shown in Figure 2. To characterize the patterns observed in the heat maps (e.g., Figure 1), 'high-scoring' regions (region-pairs) were defined.