Sentence examples for using the optimal medium from inspiring English sources

For the scale-up production of CHA, the fermentation process was then conducted in a 5-L stirred-tank bioreactor using the optimal medium composition and precursor feeding strategy.

In this work, the ornithine concentration reached 14.93 g L−1 within 72 h when using the optimal medium containing molasses pretreated with sulphuric acid and coupled with polyacrylamide, whereas a succinic acid concentration of 13.11 g L−1 was attained after 12 h using a medium containing molasses pretreated with sulphuric acid.

Fed-batch fermentation was performed in a 5-L bioreactor by using the optimal medium at pH 7.0, and different agitation speed control strategies were used.

Using the optimal medium and temperature, sublancin 168 reached repeatable yield of 135.4 mg/L in bioreactor batch fermentation after about 48 h of cultivation.

The maximum Csn protein production level that could be achieved using the optimal fermentation medium (0.76% lactose, 1.63% yeast extract, and 2.31% glutamate) was 208.23 ± 5.19 U/ml in a 5-l fermenter.

After 7 days of SmF culture using the optimal liquid medium (w/v) of yeast extract 1.48%, coffee pulp 1.94%, wheat bran 0.38%, sawdust 1.22% and urea 4.98% (Eqn 6; Table 2; Table 4), LiP from S. cinnamomensis reached a peak of 0.1450 U/mL, which was approximately 8.2 times activity of the initial average value of 0.0176 U/mL (Table 1) and higher than the expected peak of 0.1339 U/mL (Table 2).

Additional validation runs were adopted using the predicted optimal medium (medium composition of run no. 6) with 1 g L−1 as glucose was not a significant factor on the decolorization process and under the predicted optimal pH value (8) as pH significantly increased the decolorization process.

Interestingly, for a number of constructs it was found that, using the optimal expression conditions, the growth medium changed significantly in color (Table  1).

An additional validation run was adopted using the predicted optimal medium with predicted optimal conditions.

Then, stretch using the optimal.

Then, by successfully accessing the wireless medium through the use of the Carrier sense multiple access with collision avoidance (CSMA/CA -based MACSMA/CA -basedthe CR-UWB station starts using sensing the spectruMACscheme[12]ptheal τ s.