Sentence examples similar to using the maximal stress from inspiring English sources

Those conclusions where obtained using the maximal entropy principle[14].

The maximal stress value in the structure was decreased remarkably by choosing to use polyimide film with lower thermal expansion coefficient.

For non-metalized TSVs, the maximal stress is three times higher in the longitudinal direction compared to the transversal direction.

The maximal stress is around 10.18Mpa (left) and the maximal deformation is 0.15 mm (right).

Despite the high stresses concentrated in some areas, the maximal stress is far lower than the yield strength of the material with around 35Mpa.

(D ) Microtubule (YFP-MBD) orientations correlate with the maximal stress direction predicted in the mechanical model.

The model describe this behavior well, but overestimates the maximal stress values.

The maximal stress range obtained for intact implants was 650 850 MPa and for holed samples 750 850 MPa.

The failure is predicted using either a maximal stress criterion or the quadratic Tsai Wu criterion.

The results of structural analyses indicated that the maximal stresses developed under various water levels were in the acceptable range of yield stress limits for concrete.

The stress distributions of the four plate systems and the maximal stresses of the screw, plate, and bone are shown in Figures  4 and 5, respectively.