Sentence examples for using the impulse response from inspiring English sources

The RTD of biomass particles in a custom-built HSBR was measured using the impulse response method.

Using the impulse response sequences of the CFDDE and the balanced model-reduction method, a delay-free discrete-time state-space model is constructed.

Now the kind of reconstruction that we've just talked about, and the ideal reconstruction, is often referred to as band limited interpolation because we're interpolating in between the samples by making the assumption that the signal is band limited and using the impulse response for an ideal low pass filter, which has a cut off frequency consistent with the assumed bandwidth for the signal.

The rms delay spread was then calculated by using the impulse response.

The power distribution in a room can be simulated accurately using the impulse response of the channel.

By using the impulse response of these multipath channels, the mean excess delay, root mean square (RMS) delay spread for these six corridors can be obtained.

Using the impulse responses of these multipath channels, the BER performance for UWB communication system is calculated.

Using the impulse responses of these multipath channels, the bit error rate (BER) performance for binary pulse amplitude modulation impulse radio ultra-wideband communication system is calculated.

For the mono reference signals, we use the impulse response corresponding to the C loudspeaker only, while for the stereo white noise signal, we use the impulse responses corresponding to the FL and FR channels.

The injections were executed in a triangular grid and were monitored using the Impulse-Response method.

After injecting in the secondary grid, the area was inspected again using the Impulse-Response method in order to confirm the successful filling of the voids.