Sentence examples for using the first model from inspiring English sources
Two sets of models are generated, the first relating ground estimates of AGB to airborne laser scanning (ALS) measurements and the second set relating ALS estimates of AGB (generated using the first model set) to GLAS measurements.
Tsunami analyses using the first model were performed in the nested study domains B, C, and D. The grid size of the largest domain named Domain B was chosen as 90 m.
Using the first model gives the most accurate value (2,665 kWh/m2) with a percentage error of 0.261 %, and the worst value is that obtained by the third model (2,098 kWh/m2) that implies a percentage error of −21.079 %.
As shown in Table 3, the annual DNI calculated for Ghardaia using the first model of the methodology is the most accurate value (2,409 kWh/m2) with a percentage error of −0.406 %, and the worst one is that obtained by the third model (2,083 kWh/m2) that implies a percentage error of −13.863 %.
As presented in Table 2, and for the results of the used methodology, it is reasonable that the annual DNI calculated for Algiers using the first model is the most accurate value (1,621 kWh/m2) with a percentage error of 0.043 %, and the worst one is that obtained by the second model (1,871 kWh/m2) that implies a percentage error of 15.494 %.
Table 4 clearly shows that with a buffer zone of 100 m around the particle track, the LTM network optimization using the first model states 145 of the 462 wells in the Quaternary aquifer (31.38 %) and 105 of the 357 wells in the Tertiary aquifer (29.41 %) to be redundant.
Part II of the paper details the backstepping control based on the first model and the model reference nonlinear control using the second model.
Part II of the paper details the backstepping control based on the first model and the model reference non linear control using the second model.
Subsequently, we analyzed the association between mRNA expression level of the PPT-U3 region in ALVE and DNA methylation level of the ALVE region 2 using the second model.
Using the second model, there is some ambiguity at the start since it is not clear whether the replicated gene A should be identified with quantity P or Q.
In the second part, we use the first model [20] in order to determine an unknown function in the energy exchange of the macroscopic equations for gas mixtures described by Dellacherie [11].
