Sentence examples for using the experimental measures from inspiring English sources

"Poverty rates calculated using the experimental measures are all slightly higher than the official measure," Kathleen Short, John Iceland, and Joseph Dalaker, statisticians at the Census Bureau, reported in a 2002 paper reviewing the academy's recommendations.

We used the experimental measures of word priming and relational retrieval to predict each other.

The model was then validated using the experimental data measured under the CP- and channel-based VRFB geometries.

The gas and liquid relative permeability by gas flooding in the rock were calculated using the experimental data measured before and after the wettability alteration.

Raw data (i.e. confocal z stacks) were deconvolved using the experimental PSF measured for each channel and imposing the optical parameters adopted during image acquisition.

The modeled results have been computed every 15 min using the experimental global irradiation measured on the surface of the PV panels, using Equation 26 to estimate the ambient temperature and setting the wind speed vw to the average value of the day (the weight of the wind speed in the used equations is not so high as to require a more accurate approximation).

The modeled results have been computed every 15 min using the experimental global irradiation measured on the surface of the PV panels, using Eq. (26) to estimate the ambient temperature and setting the wind speed vw to the average value of the day (the weight of the wind speed in the used equations is not so high as to require a more accurate approximation).

The membrane properties were measured using the experimental nanofiltration set-up (Fig. 2).

Five parameters namely conductivity, pH, turbidity, temperature and water level are measured using the experimental setup.

The transmission characteristics of the PMF-based MRLPG were measured using the experimental setup as shown in Figure 3.

To characterize the etched ADBR, the acoustic transmission spectrum was measured using the experimental technique shown schematically in Figure 2. A specimen was placed between two external transducers operating with a central frequency at 1 GHz.