Your English writing platform
Free sign upSuggestions(5)
Exact(8)
The SNR values were calculated at different locations using the equation shown above, and then converted into p e referring to the simulation result.
In a perfect TOF-PET system (TOF resolution (rightarrow )0, thus TOF kernel to a delta function), image reconstruction would become not necessary due to the fact that the exact (i.e., as exact as physics laws allow) position of any e + e − annihilation point can be calculated from its LOR coordinates and time difference information using the equation shown in Fig. 1.
The porosity of the reservoir was calculated using the equation shown below: emptyset_{text{TD}} = frac{{left( {rho_{text{ma}} - rho_{text{b}} } right)}}{{left( {rho_{text{ma}} - rho_{text{f}} } right)}} (1 where (emptyset) TD = (emptyset) T = total porosity estimated from density log; ρ ma = matrix (or grain) density; ρ b = bulk density; and ρ f = density of the fluid.
The predicted probability of failure (pi) was calculated using the equation shown in Figure 1.
Using the equation shown in Figure 5, the change in emission ratio for the transition from unmethylated to methylated biosensor (ΔR/R%) was calculated for each colony.
The potency of a VC can then be predicted from its neighbors by applying the additivity assumption underlying Free-Wilson analysis using the equation shown in Figure 2a.
Similar(52)
The minimum voltage was converted to a radioactivity concentration using the equations shown in Fig. 3a to yield the MDA, which was 0.02 μCi μL−1 for the high-gain configuration and 0.3 μCi μL−1 for the low-gain configuration.
The masses of the end groups were calculated, using the equations shown, from the mass-to-charge ratios of two series of intense ion peaks that were observed at low mass-to-charge ratios in the MALDI-CID spectra.
The reliability of the equations was also assessed by comparing the experimental values of the responses at the centre point conditions, an average of three independent experiments (Table 3, runs 25-27), withethe values calculated using the equations shown in Table 5.
The values from Table 1 are used in the equation shown below (5) χ 2 = N (n 11 n 22 - n 12 n 21 ) 2 N 1 r N 2 r N 1 c N 2 c We utilize a chi-squared distribution with 1 degree of freedom, which is calculated from Table 1 as follows: (6) d f = r - 1 c - 1 where r is the number of rows in the table and c is the number of columns.
Due to processing issues (only one video file, present in both the video and audiovisual tests, was corrupted. However, it was crucial for computing the value of several video files with transmission errors and having the same bitrate using the equation as shown in Section 4.1).
More suggestions(2)
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.
Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com