Sentence examples for using the designed specimen from inspiring English sources
Firstly, by using the designed specimen preparation devices, two aluminum rods are glued together by adhesive material in two different pre-defined modes, namely thin bond mode and thick bond mode representing different bond thickness between particles.
Low cycle fatigue tests of type 304 stainless steel irradiated in JMTR at 823 K up to a fast neutron fluence of 1×1025 n/MeV(E>1 MeV) were performed in total strain ranges of 0.7 1.4% at 823 K using the designed small-sized specimens.
Using the designed test fixture and specimens, failure tests of spot welds were conducted with the variation of seven different loading angles in order to obtain failure loads and identify failure modes at each angle.
The aluminium alloy 2024-T351 AISIAISI 1045 carbon steel was examined in scope of uncoupled ductile fracture criteria calibration using newly designed specimen.
Ultrasonic-aided cavitation erosion tests were conducted in distilled water, using a specially designed specimen holder.
Specially designed specimen moulds were used to prepare SENB specimens of a sandy loam, a clay loam and a cemented sand soil.
The advantages of using the new specimen design are as follows: (i) the thickness of the thin wall along the axial direction is very uniform; (ii) specimen machining is extremely simple; (iii) the cost of specimen machining is greatly reduced.
The recently developed single specimen unloading compliance for SENT specimens was validated using the multiple specimen method.
It is shown that the design strengths calculated using the existing design equations are quite conservative for the test specimens.
Numerical simulation by finite element method (FEM) was used to design the specimens and to analyze the effects of the variation in the dynamic Young modulus with temperature from measurements of the ultrasonic resonance frequency.
In this study, a new nano-tension test specimen is designed, using the focused ion beam (FIB) machining.
