Sentence examples for using the cross section of from inspiring English sources

The geometry of the substrate was adjusted using the cross section of the adsorbable particle (a) as the yardstick.

Polyelectrolyte multilayers (PEMs) of poly acrylic acid) (PAA)/poly allylamine hydrochloride) (PAH) were successfully deposited onto novel nano-striped surfaces, which were generated using the cross-section surfaces of multilayer polymer films made from poly ethylene-co-acrylic acid) (EAA) and linear low-density poly ethylene-co-acrylic

In order to design the Bladeless fan an Eppler 473 airfoil profile was used as the cross section of the fan.

One possible reason is that the trachea used here was the cross section of main trachea tube originated from the spiracle, for the hardly observing any tracheole in the larvae using histological method, little knockdown of the SeCHSA transcript couldn't result in abnormal trachea in structure.

Transmission electron microscopy (TEM) was used to characterize the cross section of the thin films.

SEM was used to observe the cross section of P ECA-IA-MEG) hydrogel in different aqueous media with P ECA-IA-MEG.8.

For analysis of the ventricular wall thickness, ImageJ was used to measure the cross section of the myocardium in three fixed positions (four controls and six mutants), averaged for three measurements in each region.

For the uni-directional model, simulations were conducted using a quarter of the cross section of a cylinder representative volume element (RVE) containing a CNT, i.e., an axisymmetrical model (see Figure 1).

The detailed material properties in simulations are listed in Table 2. 4. For the uni-directional model, simulations were conducted using a quarter of the cross section of a cylinder representative volume element (RVE) containing a CNT, i.e., an axisymmetrical model (see Figure 1).

Therefore, a simple approximation of the area of the cross section was used by assuming that the cross section of the columnar joints can be expressed as the area of a circle (πr 2) enclosing the cross section of the column (Fig. 8b).

Hydraulic-controlled Vickers microhardness tester (Make: Shimadzu and model: HMV-2T) was used to measure the microhardness along the cross section of the weld joint.