Sentence examples for using the coverage factor from inspiring English sources

Most commonly, overall uncertainty was obtained using the coverage factor k = 2 to give a level of confidence of approximately 95%.

They included neglecting the effect of nonlinearity of the measurement model on efficiency uncertainty, neglecting correlation between parameters measured with a flue-gas analyser, and using the reference coverage factor equal to 2 to calculate the expanded uncertainty.

For the used procedure, these uncertainties multiply the coverage factor equal 2 to obtain the expanded uncertainty at 95% confidence level.

More specifically, the standard deviation of 10 consecutive blank (obtained for the zero-air analysis) signals and 1% probability (1 – α) for the type 1 error resulting in the coverage factor of 2.96 were used for these purposes.

However, losses are reduced to about 5% and the coverage factor reaches almost 90%.

The Lambda DNA copy number ratio between assays 5 and 2 under duplex conditions using the 20 000-ddPCR and the 765-cdPCR were 1.051 and 1.052, respectively, and the corresponding relative expanded uncertainties using a coverage factor of 2.18 were 2.8%and6.1%1%, respectively (Table 1).

A Type B uncertainty evaluation of an individual droplet volume measurement estimated the relative expanded uncertainty of this measurement as 2.0% using a coverage factor of 2.04.

The coverage factors are as large as 64 and 88%.

Using the nationwide SHI-coverage factor would underestimate the total number by 1.6% (N = 650 persons).

For every bin, the per-million reads coverage of each sample was normalized using the size factor of the sample computed by DESeq [ 57], and replicates were averaged.

 Increase project's geographic coverage through using the cross coverage from other community radio stations.