Sentence examples for using the anode chamber from inspiring English sources
These experiments demonstrate that power density per volume for a biofilm flow reactor MFC should be calculated using the anode chamber volume alone (250 W/m3), rather than with the full anolyte volume.
The medium used for the anode chamber consisted of 50 ml L PETC salt solution, 6 g L NaCl and 2 g L KCl.
Gases (CH4, CO2 and H2) were analysed within the anode chamber headspace using a gas chromatograph GC-20144, Shimadzu, Kyoto Japan) equipped with a thermal conductivity detector (TCD) and a molecular sieve 5A 60–80/Porapack Q 80 100 column as described elsewhere (Ishi et al. 2005).
Methane and hydrogen at the headspace of the anode chamber were measured using a gas chromatograph (GC - Perkin Elmer Clarus 500) equipped with a thermal conductivity detector and parallel packed columns (molecular sieve 5A) as described previously [ 40].
Therefore, the equivalent circuits proposed for the anode chamber at weeks 1 and 20 were used.
Alternatively, the efficiency of chloride oxidation in the anode chamber might be improved through the use of three-dimensional or porous electrodes that reduce mass transfer limitations or through the use of more catalytic anode materials.
β-MnO2 was further used as cathode catalyst in both cube and tube air-cathode MFCs, in which using Klebsiella pneumoniae (K. pneumoniae) biofilm as biocatalyst and utilizing glucose as a substrate in the anode chamber.
A dual-chamber MFC was used in which molasses was utilized as substrate in a fed-batch mode in the anode chamber, and dye decolorization catalyzed with an enzymatic reaction by laccase was evaluated simultaneously in the cathode.
SPGRPs (96 mm × 36 mm × 5 mm) with high specific surface areas (20,267.22 mm for each SPGRP) were used for two different purposes in this study, with one set being in the cathode chamber and another set being in the anode chamber.
Finally, elemental sulfur was identified as the predominant final oxidation product in the anode chamber.
An azo dye transported from the cathode to the anode chamber by a similar process.
