Sentence examples for using standard solutions of from inspiring English sources

All these samples were spiked by the participating laboratories using standard solutions of cereulide supplied by the organising laboratory.

Anodic peak currents were proportional to the concentration between 0.5 and 5.0 μmol L−1 using standard solutions of PD and UA respectively, and 0.50 30.0 μmol L−1 for DP and 0.50 1000 μmol L−1 for UA with real samples.

Calibration curves were used to convert the absorbance measured into concentration using standard solutions of 2, 4, 6, 8, and 10 mg/L of the dyes.

Before the measurements, the pH meter was calibrated using standard solutions of pH 4 and pH 7. EC was measured in 1 5 soil water extract by means of a conductivity meter (Sonme et al. 2008).

In the present study, linearity of eight major triterpenoic acids (BA's) was studied in the concentration range of 2.0 120 µg by using standard solutions of different boswellic acids respectively.

The calibration curve for analysis of Cu (II) ions was prepared using standard solutions of Cu (II) ion (pH of solution was adjusted about 5.0), and the potential readings were carried out using the cell setup with solid state Cu (II) electrode (PGE/PPy/SSA-Cu) and was compared with the result of PGE/PPy/SA (Figure 3, curves A and B, respectively).

The parameters of deposition and stripping processes of the analytes have been investigated using standard solution of the metal ions at various concentrations and different supporting electrolytes and different pH.

The reference microscopists used standard solutions of 3% Giemsa to stain the slides.

In order to obtain a calibration line, microelectrodes were calibrated at the beginning and end of each experiment using standard solutions covering the experimental range of each ion.

The GM300 blood glucose monitor (Bionime) was first calibrated using standard solutions containing a series of glucose concentrations, including low glucose, high glucose, and mixing low and high glucose of fresh DMEM.

Calibration curve was drawn using standard solutions in the range of 4 12 ppm.