Sentence examples for using parameters obtained by from inspiring English sources
The U-Cd level at 15% probability of an adverse response was then estimated using parameters obtained by logistic regression model in the OSCAR study.
A previous study of thin-billed prions Pachyptila belcheri demonstrated a strong positive correlation of chicks' begging with chicks' body condition and the immediate response in terms of meal size delivered by parents using parameters obtained from call counts (call number and mean and maximum call rate) but without analysis of acoustic structure of begging call elements (Quillfeldt et al. 2006).
It is possible to constitute a high performance support system in this swelling and squeezing types of rocks by choosing appropriate round interval, using a non-deformable and heavier I profile and using sufficient parameters obtained by analysis.
In order to confirm the feasibility of the proposed method, a cantilever beam and a simply supported beam were numerically investigated for two damage scenarios by using modal parameters obtained by eigenvalue analysis and simulations of an impact test using MATLAB/Simulink.
The quality factor of the spacer material Q d and tanδ is calculated and summarized in Table 1 using these parameters obtained by curve fitting and measured Q factor data.
To evaluate the characteristics of potential landslides that could occur in the area, another numerical simulation was performed with DAN3D using the rheological parameters obtained by the back analysis of the 2015 event.
Finally, a forecast analysis was carried out to evaluate the characteristics of potential landslides that could occur in the area in the future, using the rheological parameters obtained by the back analysis of the 2015 event and the post-event digital elevation model (DEM) of the area.
This work uses the calibration parameters obtained by the second method [35], which again finds corners on the calibration target and performs the calibration only for the RGB camera.
The parameters obtained by using PIV method are accurate and will be useful in the simulation of WSe2 FETs circuit at various temperatures.
The results on the design output parameters obtained by using these three codes are found to be in close agreement.
In the discussion of Saberi et al., the optimum TMD parameters obtained by using Harmony Search (HS) algorithm were investigated for two different method.
