Sentence examples for using dye concentration of from inspiring English sources

1.0 g adsorbent system showed optimum adsorption over varied amounts of adsorbent of 0.1 1.2 g using dye concentration of 3 × 10−5 M. Adsorptions of the dyes increased with increasing time and reached maximum removal at the adsorption equilibrium.

Temperature was varied from 10 to 50 °C using initial dye concentration of 100 mg/L at initial pH of 3.

The effect of pH on the removal of MB was studied using the dye concentration of 2 × 10−4 mol L−1 and at pH values in the range of 3 9.

The effect of static and shaking conditions on decolorization was tested using a dye concentration of 50 mg L−1 in 50 mL MSM supplemented with 0.1% glucose and 0.4% yeast extract at pH 7 and 30 °C under static and shaking conditions.

Figs. 4 and 5 represent the response contour plots of the initial pH (X 1), NaCl concentration (X 2), and electrolysis time (X 3) on dye removal efficiency using electro-oxidation processes with initial dye concentration of 500 μM and current density of 34.96 mAcm−2.

That value increased to 90 min when using the same adsorbent dose with initial dye concentration of 300 mg/L.

The kinetics studies of RhB and C2R adsorption on the adsorbents was carried out using the initial dyes concentration of 100 mg/L in all cases.

The removal dye shows a decreasing trend as the initial dye concentration of the dye is increased.

This results in a final dye concentration of 0.0004%.

Total protein concentration was determined by the using dye-binding method of Bradford [ 64], using γ globulin as a standard.

The sample PL quantum yield was determined by comparison of the linear (as opposed to nonlinear) emission to absorption ratio with respect to that of tabulated organic fluorescence dye, Stilbene 1, using controlled concentration of both samples, as detailed in Results.